Home / Services / Scan-to-BIM

Service 04 · Scan-to-BIM

Key Service turns laser-scanner surveys into as-built BIM models: from point cloud to model with declared LOD, ready for design. Over 60% of Italy's 12.4 million residential buildings predate 1976, and their documentation rarely matches the building as it stands. We survey from Tirana for sites in Italy, Albania and worldwide.

Scan to BIM: point clouds in, as-built models out.

A point cloud is not a model. We register it, read it and model it into an as-built BIM — on a date agreed before we start.

LOD 200–300Standard as-built delivery range
10–20 w. daysFrom scan to delivered model

Who does the work

Whoever reads the scan also models it.

Thirty years of surveying Italian territory, a decade of BIM modelling. The people who read your point cloud are the people who know how it was captured.

Team

40

Technicians working full time across surveying and BIM modelling, within a floor of 60–70.

Toolchain

Point clouds registered and indexed from survey to model, with every step tracked and documented. Parametric BIM models in Autodesk Revit built from the point cloud, with 2D/3D technical drawings in DWG format. For complex buildings, interiors and tunnels we also use mobile SLAM scanners, where a tripod cannot go.

Credentials

UNI 11337 BIM specialist and coordinator certifications.

References — a selection of clients

MISEMISE
Ospedale Militare di BariMilitary Hospital of Bari
Università di BariUniversity of Bari
Reggia di CasertaRoyal Palace of Caserta
Governo di MaltaGovernment of Malta

The problem this solves

The building exists. Its digital model does not.

>60%
Italian buildings built before 1976

The stock to be retrofitted has no as-built.

More than 60% of Italy's 12.4 million residential buildings predate 1976 — before the first energy-saving law. These are the buildings EU directives push toward deep renovation, and their documentation usually does not match reality on site.

ENEA — "The consistency of the national building stock", 2024 · EU building stock: 40% of final energy consumption, ~75% inefficient (ENEA / European Commission, 2024)

€2m
Mandatory BIM threshold · Italy

The BIM obligation applies to existing buildings too.

Since 1 January 2025, Italian public works at or above €2m require BIM delivery — including interventions on existing buildings. The as-is survey is now the design prerequisite for every retrofit.

Legislative Decree 209/2024, amending Lgs. Decree 36/2023 · separate €5.538m threshold for heritage works

What you get back

Scan to BIM services: point cloud in, as-built out.

Tell us what you scanned and the level of detail the model needs — we quote a fixed price.

DeliverableYou sendWe returnTypical turnaround
As-built from point cloud.rcp .e57 point cloud + scope note.rvt .ifc — LOD 200–300 as-built model10–20 working days
Scan model for refurbishmentScans of the existing building + available documentation.rvt .ifc — LOD 300 for retrofit design, visible structure and services15–25 working days
Comparison against designPoint cloud + design model or drawingsGeometric deviation report between as-built and as-designed5–10 working days
Drawing extractionApproved model + sheet listPlans, sections, elevations, schedules to your template5–10 working days
Geometry auditAn existing as-built model to verifyAudit report against the point cloud + corrected model5–15 working days

Turnarounds assume a single building of ordinary complexity and are confirmed in writing before work starts.

Accuracy stated, not promised

Tolerances and conditions — instrument, distance, scan density — are written into the survey report. Uncaptured zones are declared in the report and the model, not hidden in the geometry.

One supplier, from scan to model

No scans yet? We do the survey too: scanning, registration, modelling and QA in a single chain. One point of contact, no handovers.

Checked against the cloud before it reaches you

Every model passes an internal QA against the point cloud before delivery. You receive the check report with the model, not instead of it.

The why

Why us, for this specifically.

Separate survey & modellingGeneric outsourcingKey Service
Who reads the point cloudThe surveyor never modelsThe modeller was never on siteThe same people who have surveyed for thirty years
Uncaptured zonesSurface during constructionNot declaredDeclared in the report and the model
Information standardsTo be rebuiltTo be adapted to yoursUNI 11337 / ISO 19650 from the start
Revision cycleDays between repliesOvernight, each waySame working day

The real cost is hidden in revisions

The price of a model is decided on first delivery: if the modeller does not know how the cloud was captured, revisions multiply — at the point in the project where you have no time left to fix them.

We know what sits behind every scan because we scan too. A model built by people who understand the survey arrives closer to right the first time — and that shows up in your delivery date.

What this makes possible

What a ready scan-to-BIM chain changes.

Quality control

Scan data checking and model validation.

A model is only as good as the checks behind it. Every delivery passes a documented quality gate against the point cloud — and you receive the report with the model.

What we check: registration, coverage, geometry, standards

Before modelling starts: registration residuals station by station, coverage of the scope (no silent gaps), scan density against the agreed detail, and naming, units and coordinate system against your standards or UNI 11337 / ISO 19650.

The deviation report you receive

Model against cloud, element by element: a deviation report with distances, out-of-tolerance flags and the uncaptured zones declared in the report and in the model. The comparison you would run yourself — already done, in writing.

Tolerance and accuracy: how to set expectations

Tolerance follows instrument, distance and density — it is stated in writing with the conditions, not guessed. Tell us what the model is for (retrofit, quantities, facility management) and we set the checking level to match: no stricter — or costlier — than necessary.

How to start

From your point cloud to the as-built model.

Send the point cloud with a scope note: required LOD, deliverables, deadline. You get a written quote and an as-built model delivered on the agreed date.

Step one

Briefing

No obligation

You send the point cloud and the scope note; we confirm LOD, deliverables and dates in writing.

Step two

Pilot project

Fixed price · fixed scope

One complete building quoted up front, with the deliverables and dates agreed in writing before we begin.

Step three

Dedicated team

Monthly · minimum three months

A group of modellers reserved for your scan-to-BIM flow, on your conventions and your level of detail. The same people every month.

What accuracy can I expect?

Tolerance depends on instrument, distance and scan density: we state it in writing, with the conditions, and uncaptured zones are flagged in the report and the model.

How long does a model take?

For a building of ordinary complexity, between 10 and 20 working days from scan to delivery. The exact date is agreed in writing before we start.

What exactly do I receive?

The as-built model in .rvt and .ifc at the agreed LOD, plus the QA report against the point cloud. If needed, also plans, sections and elevations on your template.

What is scan to BIM?

Scan to BIM turns a laser-scanned point cloud of an existing building into an as-built BIM model — architecture, structure and services at the agreed LOD. It is the bridge between the survey and any retrofit, refurbishment or facility-management workflow.

What is your scan to BIM workflow?

Capture → registration → modelling → checking. If the point cloud exists, we register and model it; if not, we run the scanning campaign ourselves. Every model passes QA against the cloud before delivery — see scan data checking and model validation.

Which point cloud formats do you accept?

The open interchange formats — E57, RCP/RCS, LAS/LAZ, PTS/PTX — plus anything your scanner exports natively. Tell us what you have in the scope note and we confirm compatibility before quoting.

Do you work from my scans or survey as well?

Both. If the point cloud exists, we register and model it. If it does not, we run the scanning campaign — one supplier from start to finish.

How much does scan to BIM cost?

It depends on area, complexity, LOD and deliverables — fixed price on a fixed scope, quoted in writing. For the factors that move the price, see how much does scan to BIM cost.

Before you decide

The as-built is the baseline for what follows.

Your as-built model flows into your clients' designs, quantities and approvals — and you are the one who answers for it. That is why every delivery ships with a QA report against the point cloud, which you can check before passing it on.

All the specific quality controls, both the ones agreed with the client and our own internal ones. Some come from our ten years of experience, others from the needs of the client and the business. For example: checking the map sheet framework when maps are split into sheets and assigned to operators by tile.

What you can hold us to

  • Nothing leaves without a check. QA of the model against the point cloud before delivery — with the report attached.
  • Uncaptured zones are declared. What the scanner did not see is written in the report and the model, not hidden in the geometry.
  • You hear about a slip from us first. Before your deadline, with what we are doing about it.
  • Come and see it produced. Tirana is an hour from Rome, and you are welcome in the room.

Prefer email? Write to us directly: hello@keyservice.al