Home / Services / LiDAR & 3D

Service 06 · LiDAR & 3D

Key Service flies drone LiDAR and 3D scans at high density: one point cloud reusable for GIS and BIM, from vegetation-penetrating DTMs to volume computation. Flights follow aviation rules, in Italy through ENAC registration and D-Flight planning. Based in Tirana, operating in Italy, Albania and worldwide.

One survey. Reusable for GIS and BIM.

Point clouds from terrestrial scanner, drone and mobile mapping: one survey, georeferenced and classified, feeding both GIS mapping and as-built BIM.

85000000km² surveyed with LiDAR to date
9LiDAR survey campaigns per year
Centimetre-classAccuracy stated with the measurement conditions — TLS and UAV
TLS · UAV · mobilePlatforms: terrestrial, drone, mobile mapping

Who does the work

A survey capability, not a hired drone.

3D surveying is the line that brings together thirty years of land surveying and a decade of GIS: the people who measure your territory are the same ones who map and model it.

Team

0

UAS pilots with A1/A3 and A2 certificates, surveyors and GIS/BIM technicians, within a floor of 60–70.

Toolchain

Point clouds registered and indexed, with DTM/DSM and outputs ready for QGIS, ArcGIS, Revit or your own working environment. Advanced LiDAR classification and processing, for terrain models that hold up under vegetation cover. For interiors, tunnels and sites a tripod cannot reach, mobile SLAM scanners. Surveys tied to GNSS and total-station instrumentation at survey grade, with tolerances stated in writing.

Flight compliance

Citech Partnership

UAS operator registered on D-Flight; operating category (Open A2/A3 or Specific) and third-party liability insurance to be stated precisely.

References — a selection of clients

MISEMISE
Ospedale Militare di BariMilitary Hospital of Bari
Università di BariUniversity of Bari
Reggia di CasertaRoyal Palace of Caserta
Governo di MaltaGovernment of Malta

The problem this solves

The same ground, measured too many times.

29%
Construction & infrastructure share of drone LiDAR market · 2025

The brief asks for data, not a map.

Different requests — territory under vegetation, volumes, monitoring, complex buildings — all converge on one instrument: a high-density point cloud. Firms without it outsource one job at a time, with a different method and standard every time.

Mordor Intelligence, 2026 — construction & infrastructure share of the drone LiDAR market

120 m
Maximum flight altitude in Open category · ENAC

Flying is simple. Flying in compliance is not.

Operations are Open, Specific or Certified; in Italy ENAC runs registration and flight planning through D-Flight. Red zones, 120 metres, BVLOS authorisations: compliance is a quality requirement, not paperwork. An operator who states it precisely is the first guarantee on the data.

ENAC — drone framework, Reg. (EU) 2019/947 · 2026

What you get back

Platform, timing, accuracy — in writing.

Describe the area and the output you need — we quote it.

DeliverableYou sendWe returnTypical turnaround
Terrestrial LiDAR survey (TLS)Site access, control points or targets.e57 .las registered, georeferenced cloud + accuracy report1–3 working days
UAV / drone LiDAR surveyArea, ground control points (GCP), flight permitsClassified cloud, DTM/DSM, orthophoto — .las .tif + flight metadata2–5 working days
Mobile mappingAccessible route or areaGeoreferenced point cloud from vehicle or handheld1–2 working days
DTM/DSM extractionProcessed point cloudDTM/DSM, contour lines, GIS-ready products3–7 working days
Point cloud for scan-to-BIMBuilding or structure to surveyRegistered, georeferenced cloud, ready for as-built modelling2–4 working days

Turnarounds assume areas and buildings of ordinary complexity and are confirmed in writing before work starts.

One dataset, two pipelines

The same point cloud feeds GIS mapping (DTM/DSM, contour lines) and the as-built BIM model. No survey that ends up in a single use.

The right method for the scale

TLS for detail, drone for extent, mobile mapping for corridors — each platform with its stated accuracy and measurement conditions.

One person to talk to

A named project manager who answers on your working day, in English or Italian.

The why

Why us, for this specifically.

Conventional field surveyDrone photogrammetryKey Service — LiDAR
Time in the fieldDays, point by pointFast, but light and weather ruleFast, less light-dependent
Under vegetationDirect measurement, slowThe ground stays coveredPartial penetration + advanced classification
Data densityScattered pointsDense RGB cloudHigh-density multi-return cloud
ReuseA single deliverableOnly what is visibleOne survey for GIS and BIM

The real cost is re-surveying

The flight rate is not where the money goes. It goes in the campaign that has to be repeated because the data was not enough, or the model that has to be redone because the density was missing.

One survey, done once, with the right platform for the scale, arrives closer to right the first time. And when the data moves from territory to model, there is one supplier from start to finish.

What this makes possible

What a survey that gets reused actually changes.

How to start

One pilot survey. Decide with the numbers.

A small, real area or building, surveyed first: point cloud, accuracy report and flight metadata — then the numbers to decide on.

Step one

Pilot survey

Small scope · agreed price

One area or a single building, surveyed and delivered with an accuracy report — the pilot that scopes the full campaign.

Step two

Pilot project

Fixed price · fixed scope

One full project quoted up front, with the deliverables and dates agreed in writing before we begin.

Step three

Scheduled campaign

Framework agreement · recurring campaigns

Recurring surveys for quarries, landfills, monitoring or map updating: the same method, the same standard, comparable data over time.

LiDAR or photogrammetry?

It depends on what is underneath. When you need the ground under vegetation, or a dense cloud for BIM, LiDAR wins; for façades and open areas photogrammetry may be enough. We tell you, with the measurement conditions.

What accuracy can I get?

Centimetre-class, under stated measurement conditions: accuracy is defined per platform (terrestrial or UAV), range and control points, and documented in the report. We do not publish a single number without its conditions.

What format do I receive the point cloud in?

.las/.laz, .e57 and the formats of the main restitution software; DTM/DSM as .tif/.asc, ready for QGIS, ArcGIS, Revit or your own environment.

Do you cover vegetated or forested areas?

Yes: LiDAR partially penetrates vegetation. In dense woodland ground density drops and the DTM needs advanced classification — we state that in the quotation instead of promising what the method cannot guarantee.

Before you decide

The survey goes out under your name.

The point cloud, the DTM, the model go out under your practice's name, on your deadline. That is why every delivery ships with an accuracy report you can check before it moves on.

All the specific quality controls, both the ones agreed with the client and our own internal ones. Some come from our ten years of experience, others from the needs of the client and the business.

What you can hold us to

  • Nothing leaves without a report. Accuracy report and flight metadata attached to the cloud, not instead of it.
  • In compliance or not at all. Operator registered on D-Flight, operating category and third-party liability insurance checked before every campaign.
  • You hear about a slip from us first. Before your deadline, with what we are doing about it.
  • Come and see it produced. Tirana is an hour from Rome, and you are welcome in the room.

Prefer email? Write to us directly: hello@keyservice.al